¡¡¡¡¡¡Home > Product Catalog > Plastic trash bin > 50L plastic trash bin
Datas 1. volume£º50L£¨¡À3£¥£©£» 2.Dustbin Dimension: 470 x 430 x 560 (¡À1%)(mm) Wall thickness ¡Ý2.5mm, lid thickness¡Ý2.0 mm bottom thickness¡Ý2.5mm 3£®The bin weight without the lid:1.86¡À0.2 kg 4. Raw material: HDPE, Casted from the new original raw material, containing the UV stabilizers ¡Ý0.3% 5.Bolts: using 2 botls to fix the bin body and the cover, eh bolts are 100% PE raw material, disposable injection molding; No siamese hands 6. Lid: flip lid, one-time casting without joints, convenient to put the garbage,enhancing the sealing to prevent the smell inside the bin from overflowing 7. Around the bin, the stiffener must be added, so that the bin can withstand adequate mechanical strength and greater impact; 8. The new double skirt design is adopted in the bucket mouth, which is equipped with mesh stiffener ,the placeholder is to installing the intelligent identifying card for electronic management. 9. Corrosion resistance, and has sufficient mechanical strength and good impact toughness; can be used with the existing garbage truck; 10. Inside the bin body, the four corners are reinforced with two stiffeners in order to ensure that the garbage won¡¯t crack when the garbage is too full. 11. There are 3 wear resistant nails to prevent wearing at the bottom, resulting in bottom damage. 12.Manufactuer¡¯s name should be on the bin body, producing date should be on the edge of the bin. Color Red, yellow, blue, green, grey Dominant function l resist aging l freeze proof and resist high-temperature l resist acid and alkali l Environmental and recycable l sanitary and be cleaned easily

Tel: +86 138 5635 6778, Fax:+86 563 4115072
Email: norma.cheng@thaichen.com, Website:www.thaichen.com (c) THAICHEN All rights reserved.ÍîICP±¸10203105ºÅ